Vibwire-101

Single Channel Vibrating Wire Sensor Interface
Geotechnical Instrumentation

Part Number:     VibWire-101
VibWire-101 Vibrating Wire Sensor Interface
Single Channel Vibrating Wire Sensor Interface
Temperature Sensor Input
Options for SDI-12 & RS-485 Networks
Fully encapsulated plastic enclosure
  - Immersion proof
Supports 1 - 128 channel expansion using MUX-82   
expansion units.
Output Results Format:  Hz, Digits (Hz2),  SI Units
Speaker Output Port for sensor testing
Terminal Port Configuration using menu system
Supported by any 3rd Party SDI-12/485 Data Logger
Supported in Q-LOG Data Recording & Display Software
SDI-12 Network
AquaLOG Data Logger
MUX-16/32 Expansion Unit
VibWire-101
System Expansion

The VibWire-101 can be operated as a single channel device or can be expanded for large scale applications using the MUX-16/32 expansion unit. The VibWire-1018 when expanded using the MUX-16/32 units supports up to 64 x 4 wire sensors or to 128 x 2 wire sensors.

The terminal port on the instrument enables any channel on the MUX-16/32 to be selected under User control. This feature of the system considerably speeds up sensor testing in the field since the User does not have to wait for a complete scan in order to activate a specified sensor. The results for the sensor scan are available immediately.
Lightning Protection

The MUX-32 expansion unit contains in-built gas discharge protection to prevent damage to the instrumentation from local lightning strikes. For the lightning protection the MUX-16/32 has to be connected to a good earth. A solid earth mounting tab is provided on the MUX-16/32 to connect the device to the system earth.
Terminal Port
USB-RS232
Converter
Null Modem Cable
Null modem cable
Introduction

The VibWire-101 is a sensor building block for the creation of vibrating wire sensor systems. The basic device is a single channel unit making it an ideal low cost solution when individual remote monitoring of discrete sensors is required, or, as as a building block when large channel count distributed applications are required.
The VibWire-101 works with any data logger or network interface that supports SDI-12 or RS-485 digital network. Industry standard commands are used to start a measurement and recover data.

Environmental Protection

All of the VibWire-101 family of products are supplied in fully encapsulated plastic enclosures making the complete ideal for operation in harsh environments, tunnels, man holes or remote stand-alone applications. The instrument is immersion proof and will still be operating long after more expensive competitive products have failed.
USB-media
Converter
PC Computer System for
data recording & display

Select the PC screen to see
More details and to download
Q-LOG software.
VW Sensors
VW Sensors
VW Sensors
0 - 1 Km RS485 Network
 
0 - 100 m SDI-12 Network
Typical PC Based VW101 Distributed System using
The VibWire-101 and Q-LOG Software
The free version of the Q-LOG software supports up to 10 x VibWire-101 instruments onto a single digital network. The ViBWire-101 instruments running into this version of the software can be those expanded expanded using the multiplexer unit.

Data Values

The VibWire-101 can supply output values in Hz, Digits (Hz2), or SI Units. The temperature sensor output can be in units of Deg C or mV.  
The image opposite shows all that is required to create a stand-alone multi-channel vibrating wire sensor recording system.
Terminal Port

Any modern terminal program such as the Microsoft Hyper-terminal or Token-7 that supports VT100 emulation can be used to access the VibWire-101 menu system. All of the sensor configuration parameters can be set using the terminal port.
Thermistor type 1

1 Type                                            1
2 Resistance at T0 (ohms)             3312
3 T0 (Celcuis)                                 22
4 Beta                                        5234
5 Steinhart-Hart 0th order (A)        0.0
6 Steinhart-Hart 1st order (B)        0.0
7 Steinhart-Hart 2nd order (0)        0.0
Temperature sensor menu