Part Number:     VibWire-101
Ethernet LAN / Fibre Optic
Vibrating Wire Sensors
VW-Strain Gauge
Media Converter
RS-232 to Ethernet Converter
PC Data Logger

Virtual Comm Port
data recording software
Ethernet LAN / Fibre Optic
Option for 1 .. 128 x 2 wire inputs
             or 1 .. 64  x 4 wire inputs
Media
Converter
Media
Converter
Single Channel VibWire-101 - High Speed

The image opposite shows the single channel VibWire-101 interface connected to a local LAN.

The continuous ping option on this instrument enables higher speed sampling from vibrating wire sensors above what is available from a multiplexed solution.
Introduction

The images below demonstrate the basic system components required to connect the VibWire-101/108 vibrating wire instrumentation to an Ethernet LAN. Once the vibrating wire instruments are connected to the media converter then changing the network type is straight forward. There is no limit to the number of sensors that can be used across a local LAN.
The PC controls the scanning for all instruments on the network and the results are immediate. Data is converted into engineering values and can be stored directly into database, or spread sheet or used by a third party application.
VibWire-101 Single
Channel Interface
MUX16/32 Expansion unit
Intelligent System Operation

The system shown opposite can return sensor values directly in engineering units. The logger unit acts as a data buffer.
AquaLOG Logger
VibWire-101 Single
Channel Interface
VW sensor
VibWire-108 Eight
Channel Interface
Ethernet LAN / Fibre Optic
0 - 20 Hz sample rate
large Channel Count Solution
PIEZO-RM TM Sensor
Geotechnical Solutions
Vibrating Wire Instrumentation
Local Area Network Solutions
Updated: Nov 2011